Toggle Nav
My Cart
916.366.0230
Menu
Account
Search
Advanced Search
SELECT VEHICLE

2011-2022 Ford Mustang GT 1-3/4 In. Long Tube Headers - Ceramic by BBK Performance - 16330 2011-2022 Ford Mustang GT 1-3/4 In. Long Tube Headers - Ceramic by BBK Performance 2011-2022 Ford Mustang GT 1-3/4 In. Long Tube Headers - Ceramic by BBK Performance 2011-2022 Ford Mustang GT 1-3/4 In. Long Tube Headers - Ceramic by BBK Performance 2011-2022 Ford Mustang GT 1-3/4 In. Long Tube Headers - Ceramic by BBK Performance 2011-2022 Ford Mustang GT 1-3/4 In. Long Tube Headers - Ceramic by BBK Performance
2011-2022 Ford Mustang GT 1-3/4 In. Long Tube Headers - Ceramic by BBK Performance - 16330
Play Video INSTRUCTIONS

2011-2022 Ford Mustang GT 1-3/4 In. Long Tube Headers - Ceramic by BBK Performance

SKU
245609
$799.99
Free Shipping (within lower 48 states)
-
+
Wish List Compare

BBK offers high performance parts most tuners are searching for. BBK offers Dyno-tested parts that provide more horsepower & torque, as well as chassis reinforcement for better cornering & handling. All BBK Performance parts are made in USA.

  • 30+ Horsepower Increase is Typical
  • Large 1-3/4" CNC Mandrel Bent Primaries for Maximum Flow
  • Leak Free Ball & Socket Collector
  • 16 Gauge Steel Tubing with 3/8" Thick Exhaust Header Flanges to prevent heat distortion
  • Must use with BBK Mid Pipe to complete installation - see recommended additional parts
  • Gaskets and Hardware Included; Requires O2 Extension harness kits see additional info below
  • Polished Silver Ceramic Finish
  • Fits with Manual & Automatic Transmissions

    • Increased Exhaust Flow for More Horsepower
    Significantly increase the horsepower output from your 2011-2022 Mustang GT or Boss 302 with these BBK Performance full length headers. BBK full length headers will increase your exhaust flow giving you additional horsepower and torque across the RPM range. These BBK full length headers will help give your Coyote powered Mustang an awesome throaty exhaust sound that is bound to turn heads.

    Designed to Perform
    BBK Performance full length headers are built and constructed with 1-3/4" CNC-machined mandrel bent tubing with 3/8" thick die-stamped header flanges. The full length primary tube design creates unrestricted exhaust flow for ultimate horsepower and torque gains. All BBK exhaust headers are pressure tested to ensure leak free performance.

    Bolt-On Installation
    These performance headers are designed as a direct bolt on when used with a BBK Performance short mid pipe. All Kits include new gaskets and hardware.

    Emissions Information
    This part is NOT C.A.R.B Approved and cannot be installed for use on any emission controlled vehicle in California.
    It cannot be sold or shipped to any California resident or addressee.

    Fits
    2011-2014 Mustang GT or Boss 302

    2015-2022 Mustang GT


    *2018 up Owners MUST check the box label and passenger side header and Ensure that REVB is noted on each - If NOT visible - they will NOT FIT your car and you will need to exchange - Got Questions Call Us to confirm verification - 386-624-0025

    Please Note: These BBK Long Tube Headers require the use of Front O2 wire harness extensions - these are not included and are recommended for installation Please check the GEN Coyote engine that you have and order the correct harness - GEN1 Coyote 11-14 requires Part # 1112 or Part# 16332 - GEN2 Coyote 15-17 requires Part # 1119 - GEN3 Coyote 18-22 requires Part # 1121


    Installation Notes:

    Professional installation is required.

    Fitment & Application:

    More Information
    Brand BBK Performance
    Part Number BBK-16330
    Shipping Method UPS/FedEx/USPS Ground
    California Prop 65 Warning

      This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or reproductive harm. For more information, visit https://www.p65warnings.ca.gov/