Located in Horsham PA, AWE Tuning was founded in 1991 and has been in the automotive engineering sector for nearly three decades. AWE Tuning designs high-performance exhaust systems that have been used in hundreds of vehicles for smooth and optimized performance. It has a team of experienced researchers, engineers, designers, fabricators, and manufacturing experts. It features a wide range of top-quality exhausts, intakes, intercoolers, diffusers, and gears.
Presenting the Best Sounding Exhausts on the Planet for the C8 Corvette:
The Options:
Touring Edition Exhaust
At the intersection of sophistication and aggression lies the Touring Edition Exhaust. A dual 3” T304L stainless steel cat-back configuration, the AWE Touring Edition Exhaust is the perfect dose of steel for drivers looking for straight-pipe performance without sacrificing perfect daily drivability: a deep, sophisticated, exotic exhaust note with zero drone at highway speeds -- and V4 mode!
Thanks to the asymmetric design, the number of necessary bends is minimized, thus removing the unwanted restriction in flow while facilitating impressive gains across the entire powerband. Paired with robust internally-lined stainless steel flex sections upstream, engine movement is significantly isolated, enabling life-long durability for peace of mind. Going the asymmetric approach also allowed us the opportunity of creating a bespoke cross-over section with entries from both the top and the bottom. Doing this we're able to achieve a rich and aggressive exhaust note out of the LT2 whether it be at idle, rev, or WOT.
Beyond the unique crossover, the Touring Edition brings up the rear in proper fashion by featuring AWE’s patented drone-canceling solution, 180 Technology®, which targets and omits drone-prone frequencies while defeating the dreaded in-cabin tone change when switching between V4 and V8 modes.
What’s this mean for you? You’ll be tuned into a pure, full-bodied LT2 soundtrack unlike any other without sacrificing in-cabin refinement, all while saving 31 lbs over stock.
Perfect tone, compliments of AWE 180 Technology®.
As exhaust gases exit the LT2 engine and flow into an AWE 180 Technology® equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies. More on AWE 180 Technology® in the tab above.
As a finishing touch, the included aluminum heat shield bolts to the bumper (via factory mounting locations) and resides neatly behind the exhaust, out of sight, with only an AWE logo showing through the rear mesh to let everyone know what team you’re on.
Why’d we go with an aluminum solution versus a heat blanket? Heat blankets are susceptible to waterlogging and material breakdown over extended periods of time. By crafting the headshield out of aluminum it provides a true, lifetime solution.
Valve simulators:
AWE has engineered an electronic solution to simulate both AFM and NPP valves, resulting in the ECU remaining happy, allowing the C8 Corvette to operate at full stride with no CELs and maximum peace of mind. Each kit includes two pairs -- one for AFM, and the other for NPP. If your C8 does not have NPP, only one pair will be used. Purely plug-in and rip!
Conversion kits:
We made it easy to convert between Track and Touring Edition configurations if you decide at a later date to change your volume or aesthetic.
Tip Options:
The Touring and Track Edition Exhausts feature statement-making quad 4.5” tips, double-walled, slash-cut tips in either chrome silver or diamond black, complete with a stamped AWE logo.
What’s in the box?
Complete Touring or Track Edition Exhaust, four 102mm double-walled tips in the desired finish, aluminum AWE heat shield, four AWE Valve Simulators, and all necessary hardware for installation.
Installation by a licensed professional is required.
| Brand | AWE Tuning |
|---|---|
| Part Number | AWE-3015-43159 |
| Shipping Method | UPS/FedEx/USPS Ground |
| Availability | Normally ships in 1-2 business days. |
| California Prop 65 Warning | This product can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. for more information, visit www.P65Warnings.ca.gov |
